CE Certificate of A5206, A5208 Disposble Nitrile Gloves
EN ISO 374 is the international and European standard series specifying requirements and test methods for protective gloves against hazardous chemicals and micro-organisms is same with This EU Type-Examination Certificate covers the following product group(s) supported by testing to the relevant standards/technical specifications and examination of the technical file documentation. It has been issued
Under Module B of Regulation 2016/425 on personal protective equipment. This product group has been shown to satisfy the applicable essential health and safety requirements as a Category III product. EN ISO 21420:2020; EN ISO 374-1:2016+A1:2018; EN ISO 374-5:2016; EN 421:2010 (Radioactive contamination only)SNV/B/H/PE100&200 SNV/B/H/PE10L&20L 73-78
Sizes:
6-11(XS-XXL)
40% Sodium hydroxide (K) 30% Hydrogen peroxide (P) 37% Formaldehyde (T)
Protection against Bacteria and Fungi Protection against Viruses
6
2
5
Level Pass Pass
-68.1 30.5 9.5
ENISO374-5:2016
Classification:
ENISO374-1:2016+A1:2018/Type B
Level
EN ISO 374-4:2019Degradation %
Yes, the provided text from the EU Type-Examination Certificate directly demonstrates compliance with the EN ISO 374 standard.
The standard EN ISO 374 is the overarching standard series governing protective gloves against dangerous chemicals and micro-organisms. The certificate text is the formal document verifying that a specific product group has been tested and certified under this standard.
| Certificate Text Excerpt | Meaning & Standard Alignment |
Regulation 2016/425 ... Category III product |
Categorized under Category III PPE (complex design protecting against irreversible or fatal risks, such as hazardous chemicals and micro-organisms). |
EN ISO 374-1:2016+A1:2018 / Type B |
Certified under EN ISO 374-1 (Chemical protection). Type B classification requires achieving at least Level 2 (≥30 min breakthrough time) for a minimum of 3 chemicals. |
|
|
The 3 test chemicals with their standard letter codes: • K: Level 6 (>480 min breakthrough time) • P: Level 2 (>30 min breakthrough time) • T: Level 5 (>240 min breakthrough time) Because 3 chemicals achieved Level 2 or higher, it fulfills the Type B requirement. |
-68.1, 30.5, 9.5 |
EN ISO 374-4:2019 (Degradation %) results for chemicals K, P, and T, respectively, showing physical change percentage after exposure. |
EN ISO 374-5:2016 |
Certified under EN ISO 374-5 (Micro-organism protection). |
|
|
Confirms penetration resistance under EN 374-2 (air/water leak) and viral penetration test under ISO 16604 Procedure B. |
EN 421:2010 (Radioactive contamination only) |
Meets additional specific standards for protection against radioactive particulate contamination. |
EN ISO 21420:2020 |
Replaced EN 420 as the core general requirement standard for gloves (sizing, dexterity, innocence, packaging). |